Maxxum® Submersible Turbine Pump (STP)

Red Jacket Maxxum® Submersible Turbine Pump (STP)

The Red Jacket® Maxxum Submersible Turbine Pump (STP) offers the highest flow rates in the industry and is designed for 6" high flow applications. Leading serviceability and safety features may be found in the Maxxum series. It is designed for high throughput applications like truck stops, where high demand, numerous fuel points, and extensive piping runs decrease fuel flow to the nozzle. It has a 3 or 5 HP motor.

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Reduced Wear: enhanced design results in quieter operation and less wear
Improved Insulation Rating: higher insulation temperature rating assures longer running life
Increased Protection: additional stainless components result in better protection for use with blended fuels
Backwards Compatible: Maxxum UMPs are compatible with previous 3 & 5 HP Maxxum STPs
Explosion Proof: improved design provides increased levels of safety; certified UL/cUL/IECEx/ATEX Explosion proof motor.
Continuous Safety Improvements: design enhancements guided by newer international flame proofing standards.

Part Number	Model Number	HP	KW	Voltage	Phase
410763-006	MXP300J4-2HB w/Siphon	3	2.24	230	Three
410763-001	MXP300J4-2HB	3	2.24	230	Three
410763-008	MXP500J4-2K w/Siphon	5	3.73	230	Three
410763-003	MXP500J4-2K	5	3.73	230	Three
410763-009	MXP500J6-2K w/Siphon	5	3.73	575	Three
410763-004	MXP500J6-2K	5	3.73	575	Three

Delivers over 20% more flow than alternative high capacity pumps. Flow performance exceeds all other 6” Submersible Turbine Pump.
Designed to meet Environmental Compliance requirements. Compatible with Veeder-Root Pressurized Line Lead Detector (PLLD), vapor recovery pump driving port and transducer post for electronic leak detection (ELLD).
Easy and safe electrical yoke disconnect, termination of pump wiring in conduit box.
Quick removal of extractable pump head and quick accessibility of check valve.
Available with or without siphon.
Also available in 50 Hz STP Models. Contact customer service for more information.

Fuel Compatibility	100% diesel, fuel oil, Avgas, jet fuel or kerosene. 100% Gasoline All blends of automotive and similar liquid fuels including alcohol blends from 0 to 20% ethanol, 0 to 20% methanol, 20% MTBE, ETBE or TAME with 80% gasoline
Motor Sizing	3 HP, 60 HZ, 3-phase 5 HP, 60 HZ, 3-phase
Hardware Construction	1) Packer/Manifold Head: Gray Cast Iron 2) Elastomers -"O" Rings: Fluorocarbon 3) Check Valve Seat: Brass 4) Column Pipe 3”: Schedule 40 Black Steel Pipe 5) Conduit Pipe 3/4": Aluminum or Steel 6) Discharge Head: Gray Cast Iron 7) Riser Pipe 6”: Schedule 40 Black Steel Pipe with Welded Flange incorporating ¾-10 UNC-2B Threads Located on a 9.5” Bolt Circle 8) Outer Shell: Steel 9) Stator Shell: Stainless Steel 10) Pump Shaft: Stainless Steel 11) Diffusers: 3HP - Celcon® (Acetal) Plastic 5HP – Cast Iron 12) Impellers: 3HP & 5HP - Aluminum 13) Motor Bearings: Carbon 14) Motor Shaft: Stainless Steel journals & extension
Operation Environment	Rated for operation between -20°F (-29°C) and 105°F (40.5°C) in non-gelling petroleum products. Listed under UL 79 for operation between -20°F (-29°C) and 125°F (52°C) ambient environment Maximum liquid viscosity : 70 SSU @ 60°F (15°C).
Installation Depth Range	Up to 20'
Packer Manifold Access Ports	Siphon Ports: 1 available, 1/4" NPT Line Test Ports: 1 available, 1/4" NPT Pressure Port: 1 available, 1" NPT Clean out Ports 2 available, various sizes
Check Valve	Built-in line check valve, pressure relief valve, 2” NPT port for electronic line leak detection
Agency	UL Listings: 100% Diesel 100% Gasoline Gasoline and up to: 10% Ethanol, 15% Methanol, 20% MTBE, 20% ETBE, 20% TAME Other Agency Listings: cUL

PUMP COMPONENTS	MATERIAL
Packer/Manifold Head	Gray Cast Iron
Elastomers -"O" Rings	Fluorocarbon
Check Valve Seat	Brass
Column Pipe	3” Schedule 40 Black Steel Pipe
Conduit Pipe	3/4" Aluminum or Steel
Discharge Head	Gray Cast Iron
Riser Pipe	6” Schedule 40 Black Steel Pipe with Welded Flange incorporating ¾-10 UNC-2B Threads Located on a 5” Bolt Circle

PUMP/MOTOR	MATERIAL
Outer Shell	Steel
Stator Shell	Stainless Steel
Pump Shaft	Stainless Steel
Diffusers	3HP - Celcon® (Acetal) Plastic 5HP – Cast Iron
Impellers	3HP & 5HP - Aluminum
Motor Bearings	Carbon
Motor Shaft	Stainless Steel journals & extension