The FIT Wilden® fastened metal pump is the new benchmark for pump performance. Wilden's bolted-construction pumps have better flow rates (up to 35% over competing models) and diaphragm life thanks to an improved flow path design. The bolt down footprint and inlet/discharge connections on Wilden's bolted pumps are identical to those on their clamped counterparts, making replacement simple. These pumps are also built for greater containment.
AIR INLET
LIQUID INLET
LIQUID DISCHARGE
CONNECTION TYPE
MAX FLOW RATE
MAX PRESSURE
MAX DIAMETER SOLIDS
MAX SUCTION LIFT CAPABILITY
DISPLACEMENT PER STROKE*
*1 cycle = 2 strokes
ITEM |
METRIC (mm) |
STANDARD (inch) |
A |
442 |
17.4 |
B |
64 |
2.5 |
C |
248 |
9.8 |
D |
391 |
15.4 |
E |
445 |
17.5 |
F |
51 |
2.0 |
G |
250 |
9.8 |
H |
93 |
3.7 |
J |
132 |
5.2 |
K |
292 |
11.5 |
L |
384 |
15.1 |
M |
274 |
10.8 |
N |
224 |
8.8 |
P |
152 |
6.0 |
R |
178 |
7.0 |
S |
11 |
0.4 |
ITEM |
METRIC (mm) |
STANDARD (inch) |
A |
443 |
17.5 |
B |
89 |
3.5 |
C |
273 |
10.8 |
D |
528 |
20.8 |
E |
529 |
20.8 |
F |
275 |
10.8 |
G |
93 |
3.7 |
H |
84 |
3.3 |
J |
86 |
3.4 |
K |
132 |
5.2 |
L |
292 |
11.5 |
M |
384 |
15.1 |
N |
274 |
10.8 |
P |
224 |
8.8 |
R |
178 |
7.0 |
S |
203 |
8.0 |
T |
11 |
0.4 |
DIN (mm) |
ANSI (Inch) |
|
U |
150 DIA. |
5.0 DIA. |
V |
109 DIA. |
3.9 DIA. |
W |
18 DIA. |
0.6 DIA. |
P420/P430 METAL RUBBER-FITTED
Max. Flow Rate: 492 1pm (130 gpm)
Max. Inlet Pressure: 8.6 bar (125 psig)
Max. Solids Passage: 6.4 mm (1/4")
Max. Suction Lift: 5.5 m Dry (18.2') 9.0 m Wet (29.5')
P420/P430 METAL REDUCED-STROKE PTFE-FITTED
Max. Flow Rate: 341 Ipm (90 gpm)
Max. Inlet Pressure: 8.6 bar (125 psig)
Max. Solids Passage: 6.4 mm (1/4")
Max. Suction Lift: 2.8 m Dry (15.9') 9.0 m Wet (29.5')
Wetted Housings
MATERIAL | SHIP WEIGHT |
---|---|
Aluminum | 26 kg (57 lb) (P420) 28 kg (62 lb) (P430) |
Stainless Steel | 50 kg (111 lb) (P420) 53 kg (116 lb) (P430) |
Ductile Iron | 39 kg (86 lb) (P420) 42 kg (92 lb) (P430) |
Non-Wetted Housings
DESCRIPTION | MATERIAL |
---|---|
Center Section | Polypropylene |
Air Valve | Polypropylene |
Air Chamber | Aluminum |
MATERIAL | TEMPERATURE LIMITS |
---|---|
Buna-N | -12°C to 82°C (10°F to 180°F) |
EPDM | -51°C to 138°C (-60°F to 280°F) |
FKM | -40°C to 177°C (-40°F to 350°F) |
Geolast® | -40°C to 82°C (-40°F to 180°F) |
Neoprene | -18°C to 93°C (0°F to 200°F) |
PTFE* | 4°C to 104°C (40°F to 220°F) |
Polyurethane | -12°C to 66°C (10°F to 150°F) |
Saniflex™ | -29°C to 104°C (-20°F to 220°F) |
Wil-Flex™ | -40°C to 107°C (-40°F to 225°F) |
* 4°C to 149°C (40°F to 300°F) - 13 mm (1/2") and 25 mm (1") models only