Petroleum 15 Self Priming Centrifugal Pump

MP Pumps 3" X 3" Petroleum 15 Self Priming Centrifugal Pump

Self-priming centrifugal pumps made of Petroleum 15 are capable of producing a vacuum strong enough to lift liquids up to 25 feet above the source. The Petroleum 15 is available in three different models: PO, PG, and PE 15, and can handle a variety of fuels.

Hydraulic motors, 184TC and 215C frame motors, gas engines, and other drivers can all be readily linked to a Petroleum 15 PumPAK®, which is a fully assembled and run-tested pump end. Additionally, a bearing pedestal for belt drive or a T-frame motor is offered.

A semi-open dynamically balanced impeller and an SS drive sleeve are included as standard features, along with SS fasteners and a renewable wear plate.

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Suction And Discharge: 3" x 3" NPT
Materials Of Construction: Cast iron, Ductile iron Flow Up to 320 GPM
Head: Feet Up to 145'
Impeller: PE 15 - semi-open cast iron, 316 SS (optional), PG 15 - semi-open cast iron, aluminum (optional), PO 15 - semi-open cast iron
Motor: Up to 7.5 HP
Drive Options: Close coupled 184TC, Engine mount 11 HP, Engine mount 13 HP, Engine mount 5.5 HP, Engine mount 6.5 HP, Hydraulic motor .73 cu. in., Pedestal, PumPAK® (without motor)
Seal: PE 15 - carbon / silicon carbide / Viton, PG 15 - carbon / silicon carbide / Viton, PO 15 - carbon / Ni-Resist / Viton
Compatible For: PE 15 - ethanol, E 85, PG 15 - gasoline, avgas, kerosene, jet A/8, PO 15 - biodiesel, fuel oil, diesel

Gas engine for diesel fuel transfer
Non-spark clamp (on some models)
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift

Agricultural
Industrial
Marine
OEM

	PART NO.	ITEM NO.	DESCRIPTION	QTY.		PART NO.	ITEM NO.	DESCRIPTION	QTY.
	21291	1	CAPSCREW SS - 3/8-16 X 1.13"	8		21268	14	HEX NUT SS - 3/8-16	10
	21266	2	LOCKWASHER SS 3/8"	18		21263	15	ACORN NUT - 3/6-16	2
	35628	3	SUCTION FLANGE D - 3" NPT	1	*	21271	16	GASKET - 5/8 X 3/8 X 1/16	2
*	35630	4	GASKET CORK/BUNA	2		35650	17	PIPE PLUG SS 3/4 NPT	1
	35625	5	HOUSING DUCTILE	1		21246	18	HEX HD SCREW SS 1/2-13 X 1.25	4
	35629	6	DISCHARGE FLANGE D - 3" NPT	1		21254	19	LOCKWASHER SS - 1/2	4
*	22242	7	WEAR PLATE ALUMINUM	1		22423	20	BASE - ZPS	1
	21262	8	FLAT HD SCR. SS - 3/8-16 X 1.25	2		24710	21	SPACER STL.	2
*	35721	9	GASKET - C-4433	1		21259	22	HEX HD SCREW SS 3/8-16 X 1.38	4
	22499	10	IMPELLER D 5.75" DIA 1.13 I.D.	1		35649	23	CLAMP B	1
*	35651	11	SEAL 1.5" T-2 CAR/SIC/VIT	1		27585	24	EL MTR: 5-3 184TC 3450/2850	1
	35627	12	ADAPTOR DUCTILE	1				EXPLOSION PROOF
	21261	13	STUD SS - 3/8-16 X 1.63	6

* SUGGESTED REPLACEMENT PARTS

** COMPATIBLE FOR KEROSENE, JET A/8 & GASOLINE

PART NO.	ITEM NO.			DESCRIPTION		QTY.		PART NO.	ITEM NO.			DESCRIPTION	QTY.
22351		1	HOUSING C		1		23038			13	IMPELLER S/A - D 6.0 DIA.			1
35650		2	PIPE PLUG S.S. - 3/4" NPT		1		22363			14*	SEAL- 1.5" - TYPE 21 CAR/NRS VITON			1
35630		3*	GASKET SUCTION - BUNA		1		22345			15	ADAPTER C			1
22468		4	FLANGE - SUCTION C		1		22461			16	HEX NUT STL - 5/8-11			1
21291		5	CAP SCREW S.S.- 3/8-16 X 1.13"		8		22460			17	LIFT EYE ZPS 5/8-11 X 10"			1
21266		6	LOCK WASHER- 3/8		20		21268			18	HEX NUT - S.S. 3/8-16			12
37138		7*	0 RING DISCHARGE - VITON		1		22356			19	CLAMP S.S.- 1"			2
41481		8	PIPE PLUG C - 3/4" NPT		1		21269			20	CAP SCREW- S.S. 3/8-16 X 2.25"			2
35721		9*	GASKET - KINGERSIL C-4433		1		21256			21	CAP SCREW- S.S. 3/8-16 X 1.38"			4
29715		10*	0 RING - VITON		1		21260			22	STUD S.S. - 3/8-16 X 1.32"			6
22244		11*	WEAR PLATE STL.		1
37115		12	FLAT HD. SCR. S.S. - 3/8-16 X .75"		2