Blackmer Frame S Centrifugal Pumps

blackmer-frame-s-centrifugal-pump-interior

Blackmer Frame S Centrifugal Pump

The Frame S Centrifugal Pump serves as a robust alternative to typical small frame pumps, which are prone to being overstressed when operated away from their optimal performance point. Offering mid-frame strength and reliability within the confines of a small frame space, the Frame S Centrifugal Pump can be seamlessly integrated into the same space, mounted on the same baseplate, and connected with the same piping as conventional small frame pumps. This versatile pump is available in four different sizes.

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Features
Applications
Specifications
Dimensions
Performance Curve

Heavy-duty substitute for typical tiny frame pumps, offering mid-size frame strength and dependability in a compact frame size
To accommodate a variety of applications and size constraints, there are four model sizes.
The comparable size pump with the lowest L3/D4 stiffness ratio is the 46 (1.9) Frame S.
Fulfills the dimensional requirements of ASME/ANSI
Up to 450 gpm (102 m3/hr) of flow capacity
Able to accommodate a C-Frame (NEMA)/D-Flange (IEC) motor adaptor, enabling motor and power end alignment without the need for specialized equipment or a lot of work
With the optional unique foot, one can discharge from the right or left side.
Low stiffness ratios and robust design on shafts
Prolongs the life of seals and prevents common vibration damage
Reduced bearing stress from a short shaft overhand prolongs bearing life.
Greater load capacity and longer bearing life are offered by oversized heavy duty bearings.
Frame S offers an optional bearing frame foot with overhung casing

Chemicals
Mining de-watering
Water/wastewater
Liquid terminals

Mid size frame strength and reliability in small frame space
Heavy duty alternative to standard small frame pumps
Lowest L3/D4 stiffness ratio of any competitive size pump 26 (1.9) Frame S
Meets ASME/ANSI dimensional specifications
Capacities up to 450 gpm (102 m3/hr)
Operating temperature range from -40˚ to 400˚F (-40˚ to 204˚C)
Military shock standard S901 Grade A
Frame M Pump – ASME/ANSI

Frame M Pump – ASME/ANSI

	Pump Size	A1	A	D	2E1	2E2	F	H	O	U	V	X
1	6 x 8-13	25.50	14.00	14.50	16.00	9.00	18.75	0.875	30.50	2.375	4.00	16
2	6 x 8-15	27.25	14.75	14.50	16.00	9.00	18.75	0.875	32.50	2.375	4.00	18
3	8 x 10-13	27.25	15.25	14.50	16.00	9.00	18.75	0.875	32.50	2.375	4.00	18
4	8 x 10-15	28.75	15.75	14.50	16.00	9.00	18.75	0.875	33.50	2.375	4.00	19

All dimensions are in inches.

Frame M Pump – Metric

	Pump Size	A1	A	D	2E1	2E2	F	H	O	U	V	X
1	6 x 8-13	648	356	368	406	229	476	22	775	60	102	406
2	6 x 8-15	692	375	368	406	229	476	22	826	60	102	457
3	8 x 10-13	692	387	368	406	229	476	22	826	60	102	457
4	8 x 10-15	730	400	368	406	229	476	22	851	60	102	483