2" X 2" Petroleum 10 Self Priming Centrifugal Pump

MP Pumps 2" X 2" Petroleum 10 Self Priming Centrifugal Pump

Self-priming centrifugal pumps made of Petroleum 10 are capable of producing a vacuum strong enough to lift liquids up to 25 feet above the source.

A Petroleum 10 PumPAK® is a completely assembled and run-tested pump end that is simple to couple to a variety of drivers, including gas engines, 182TC and 184TC frame motors, hydraulic motors, and electric motors. Additionally, a bearing pedestal for belt drive or a T-frame motor is offered.

A semi-open dynamically balanced impeller and an SS drive sleeve are included as standard features, as well as SS fasteners and a renewable wear plate.

The Petroleum 10 Pump is available in three distinct models: PG, PO and PE

Model PG Pumps - Compatible For Gasoline, Kerosene, Avgas & Jet Fuel
Model PO Pumps - Compatible For BioDiesel, Fuel Oil & Diesel
Model PE Pumps - Compatible For Ethanol & E 85

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Suction And Discharge: 2" x 2" NPT
Materials Of Construction: Cast iron, Ductile iron
Flow: Up to 225 GPM
Head: Feet Up to 145'
Impeller: PE 10- semi-open cast iron, 316 SS (optional), PG 10- semi-open cast iron, aluminum (optional), PO 10- semi-open cast iron
Motor: Up to 7.5 HP
Drive Options: Close coupled 184TC, Engine mount 11 HP, Engine mount 13 HP, Engine mount 5.5 HP, Hydraulic motor .73 cu. in., Pedestal, PumPAK® (without motor)
Seal: PE- carbon/ silicon carbide/ Viton, PG 10 - carbon / silicon carbide / Viton, PO 10 - carbon / Ni-Resist / Viton
46 Cfr Compliant: Engine mount 6.5 HP
Compatible For: PE 10 - ethanol, E 85, PG 10 - gasoline, avgas, kerosene, jet A/8, PO 10 - biodiesel, fuel oil, diesel
Mounting Options: PE 10 - explosion proof, class 1, group D, PG 10 - explosion proof, class 1, group D,

Agricultural
Industrial
Marine
OEM

Gas engines for diesel fuel transfer
Non-spark clamp (on some models)
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift

	PART NO.	ITEM NO.	DESCRIPTION	QTY.		PART NO.	ITEM NO.	DESCRIPTION	QTY.
	21291	1	CAPSCREW SS - 3/8-16 X 1.13"	8		22348	12	ADAPTOR CAST IRON	1
	21266	2	LOCKWASHER SS 3/8"	20		21260	13	STUD SS - 3/8-16 X 1.32	6
	22369	3	SUCTION FLANGE C - 2" NPT	1		22356	14	CLAMP SS	2
*	35630	4	GASKET CORK/BUNA	2		21268	15	HEX NUT SS - 3/8-16	8
	22351	5	HOUSING CAST IRON	1		41481	16	PIPE PLUG C 3/4 NPT	1
	22372	6	DISCHARGE FLANGE C - 2" NPT	1		21259	17	HEX HD SCREW SS 3/8-16 X 1.38	4
*	22244	7	WEAR PLATE STL	1		35650	18	PIPE PLUG SS 3/4 NPT	1
	37115	8	FLAT HD SCR. SS - 3/8-16 X .75	2		21269	19	HEX HD SCREW SS 3/8-16 X 2.25	2
*	35721	9	GASKET - C-4433	1		26163	20	PEDESTAL ASSY. CAST IRON	1
	23038	10	IMPELLER D 6" DIA	1	*	21271	21	GASKET - 5/8 X 3/8 X 1/16	1
*	22363	11	SEAL 1.5" T-2 NRS	1

* SUGGESTED REPLACEMENT PARTS

** COMPATIBLE FOR DIESEL, BIO-DIESEL, & FUEL OIL.

	PART NO.	ITEMS NO.	DESCRIPTION	QTY.		PART NO.	ITEMS NO.	DESCRIPTION	QTY.
	22433	1	ADAPTER- C.I.	1		35650	11	PIPE PLUG- 3/4 NPT 316 S.S.	1
*	35721	2	GASKET - KINGERSIL C-4433	1		21246	12	CAP SCREW S.S.- 1/2-13 X 1.25"	4
	23387	3	IMPELLER - 6.0" D.I. - 1.13 I.D.	1		22369	13	FLANGE - SUCTION C.I.	1
*	22363	4	SEAL- 1.5" VITON CAR/NRS TYPE 21	1		37115	14	FLAT HD. SCR. S.S. - 3/8-16 X 1.75"	2
	22351	5	HOUSING C.I.	1		21254	15	LOCKWASHER - S.S. 1/2	4
*	22244	6	WEAR PLATE STL.	1		21261	16	STUD S.S. - 3/8-16 X 1.63"	6
	22372	7	FLANGE - DISCHARGE - C.I.	1		21269	17	CAP SCREW- S.S. 3/8-16 X 2.25"	2
*	35630	8	GASKET - DISCHARGE BUNA	2		22356	18	CLAMP S.S.- 1"	2
	21291	9	CAP SCREW S.S.- 3/8-16 X 1.13"	8		21268	19	HEX NUT - S.S. 3/8-16	8
	21266	10	LOCK WASHER- 3/8	16	*	37138	20	0 RING - VITON	1
						41481	21	PIPE PLUG- 3/4 NPT C.I.	1

*- RECOMMENDED REPLACEMENT PARTS

	PART NO.	ITEM NO.	DESCRIPTION	QTY.		PART NO.	ITEM NO.	DESCRIPTION	QTY.
	21242	1	CAPSCREW - 5/16"-18 X 7/8"	8	*	21248	19	GASKET - 1/2 X 5/16 X 1/16	2
	21238	2	LOCKWASHER 5/16	26		21267	20	PIPE PLUG SS 1/4 NPT	1
	35614	3	SUCTION FLANGE D - 2" NPT	1	*	22258	21	WEAR PLATE ALUMINUM	1
*	35609	4	GASKET CORK/BUNA	2		21249	22	SCREW SS 5/16-18X1	2
	35604	5	HOUSING DUCTILE	1		22286	23	DRIVE SLEEVE SS 3/4	1
	35615	6	DISCHARGE FLANGE D - 2" NPT	1	*	35610	24	SEAL T-2 CAR/SIC/VIT	1
	22655	7	JAM NUT - 5/8"-18	1		26085	25	SHAFT STL	1
	22293	8	IMPELLER C 5" DIA.	1		22300	26	BALL BEARING	2
	30321	9	STUD - 5/16"-18 X 1.13"	6		21695	27	SNAP RING	1
	21284	10	HEXNUT - 5/16"-18	6		26305	28	BASE STL	1
*	35722	11	GASKET C-4433	1		26304	29	CPLG GUARD	1
	35606	12	ADAPTOR DUCTILE	1		21259	30	CAPSCREW - 3/8"-16 X 1 3/8	4
	35612	13	CLAMP B: 3/4 SL.	1		21266	31	LOCKWASHER SS 3/8	4
	22321	14	WOODRUFF KEY STL	1		26306	32	BLOCK SPACER STL	2
	21278	15	CAPSCREW - 5/16"-24 X .88	4		22444	33	COUPLING 3/4 x 1.13	1
	26140	16	PEDESTAL C	1		25682	34	ELECTRIC MOTOR 3-3 182T 3450	1
	21250	17	CAPSCREW - 5/16"-18 X 1.13	4				230/460 EXPLOSION PROOF
	21237	18	ACORN NUT - 5/16"-18	2

* SUGGESTED REPLACEMENT PARTS

** COMPATIBLE FOR KEROSENE, JET A/8 & GASOLINE

	PART NO.	ITEM NO.	DESCRIPTION	QTY.		PART NO.	ITEM NO.	DESCRIPTION	QTY.
	21242	1	CAPSCREW - 5/16"-18 X 7/8"	8	*	21248	19	GASKET - 1/2 X 5/16 X 1/16	2
	21238	2	LOCKWASHER 5/16	26		21267	20	PIPE PLUG SS 1/4 NPT	1
	35614	3	SUCTION FLANGE D - 2" NPT	1	*	22258	21	WEAR PLATE ALUMINUM	1
*	35609	4	GASKET CORK/BUNA	2		21249	22	SCREW SS 5/16-18X1	2
	35604	5	HOUSING DUCTILE	1		22286	23	DRIVE SLEEVE SS 3/4	1
	35615	6	DISCHARGE FLANGE D - 2" NPT	1	*	35610	24	SEAL T-2 CAR/SIC/VIT	1
	22655	7	JAM NUT - 5/8"-18	1		26085	25	SHAFT STL	1
	22293	8	IMPELLER C 5" DIA.	1		22300	26	BALL BEARING	2
	30321	9	STUD - 5/16"-18 X 1.13"	6		21695	27	SNAP RING	1
	21284	10	HEXNUT - 5/16"-18	6		26305	28	BASE STL	1
*	35722	11	GASKET C-4433	1		26304	29	CPLG GUARD	1
	35606	12	ADAPTOR DUCTILE	1		21259	30	CAPSCREW - 3/8"-16 X 1 3/8	4
	35612	13	CLAMP B: 3/4 SL.	1		21266	31	LOCKWASHER SS 3/8	4
	22321	14	WOODRUFF KEY STL	1		26306	32	BLOCK SPACER STL	2
	21278	15	CAPSCREW - 5/16"-24 X .88	4		22444	33	COUPLING 3/4 x 1.13	1
	26140	16	PEDESTAL C	1		25682	34	ELECTRIC MOTOR 3-3 182T 3450	1
	21250	17	CAPSCREW - 5/16"-18 X 1.13	4				230/460 EXPLOSION PROOF
	21237	18	ACORN NUT - 5/16"-18	2

* SUGGESTED REPLACEMENT PARTS

** COMPATIBLE FOR KEROSENE, JET A/8 & GASOLINE

	ITEM NO.	ITEM NO.	DESCRIPTION	QTY.		ITEM NO.	PART NO.	DESCRIPTION	QTY.
	21291	1	CAPSCREW SS - 3/8-16 X 1.13"	8		22348	12	ADAPTOR CAST IRON	1
	21266	2	LOCKWASHER SS 3/8"	20		21260	13	STUD SS - 3/8-16 X 1.32	6
	22369	3	SUCTION FLANGE C - 2" NPT	1		22356	14	CLAMP SS	2
*	35630	4	GASKET CORK/BUNA	2		21268	15	HEX NUT SS - 3/8-16	8
	22351	5	HOUSING CAST IRON	1		41481	16	PIPE PLUG C 3/4 NPT	1
	22372	6	DISCHARGE FLANGE C - 2" NPT	1		21259	17	HEX HD SCREW SS 3/8-16 X 1.38	4
*	22244	7	WEAR PLATE STL	1		35650	18	PIPE PLUG SS 3/4 NPT	1
	37115	8	FLAT HD SCR. SS - 3/8-16 X .75	2		21269	19	HEX HD SCREW SS 3/8-16 X 2.25	2
*	35721	9	GASKET - C-4433	1		26163	20	PEDESTAL ASSY. CAST IRON	1
	23038	10	IMPELLER D 6" DIA	1	*	21271	21	GASKET - 5/8 X 3/8 X 1/16	1
*	22363	11	SEAL 1.5" T-2 NRS	1

* SUGGESTED REPLACEMENT PARTS

** COMPATIBLE FOR DIESEL, BIO-DIESEL, & FUEL OIL.

	PART NO.	ITEM NO.	DESCRIPTION	QTY.		PART NO.	ITEM NO.	DESCRIPTION	QTY.
	22433	1	ADAPTER- C.I.	1		35650	11	PIPE PLUG- 3/4 NPT 316 S.S.	1
*	35721	2	GASKET - KINGERSIL C-4433	1		21246	12	CAP SCREW S.S.- 1/2-13 X 1.25"	4
	23387	3	IMPELLER - 6.0" D.I. - 1.13 I.D.	1		22369	13	FLANGE - SUCTION C.I.	1
*	22363	4	SEAL- 1.5" VITON CAR/NRS TYPE 21	1		37115	14	FLAT HD. SCR. S.S. - 3/8-16 X 1.75"	2
	22351	5	HOUSING C.I.	1		21254	15	LOCKWASHER - S.S. 1/2	4
*	22244	6	WEAR PLATE STL.	1		21261	16	STUD S.S. - 3/8-16 X 1.63"	6
	22372	7	FLANGE - DISCHARGE - C.I.	1		21269	17	CAP SCREW- S.S. 3/8-16 X 2.25"	2
*	35630	8	GASKET - DISCHARGE BUNA	2		22356	18	CLAMP S.S.- 1"	2
	21291	9	CAP SCREW S.S.- 3/8-16 X 1.13"	8		21268	19	HEX NUT - S.S. 3/8-16	8
	21266	10	LOCK WASHER- 3/8	16	*	37138	20	0 RING - VITON	1
						41481	21	PIPE PLUG- 3/4 NPT C.I.	1