With Blackmer E Series Magnetic Drive Gear Pumps, you can increase the efficiency of your pumps. Because of their unique design and proprietary between-the-bearing support system, E Series Magnetic Drive Gear Pumps are strong, long-lasting, and eco-friendly. They are designed to outperform the competition. This unique design helps improve the safety of site workers and the environment by removing leaks and lowering mechanical wear. A broad range of chemical compatibility is possible when using carbon steel, stainless steel, or ductile iron as building materials. Furthermore, the E Series Magnetic Drive Gear Pump has the lowest initial cost, lowest total cost of ownership, and highest level of dependability of any magnetically coupled pump.
Between-Bearing Support System
The support system positioned between the bearings effectively eliminates the detrimental impact of cantilevered loads found in rival internal gear pumps, thereby extending the lifespan of the rotor, idler, and bushing components.
Single Fluid Chamber Configuration
The design featuring a sole fluid chamber significantly enhances fluid circulation within the magnetic coupling, leading to reduced operating temperatures, prolonged magnet durability, and improved efficiency in cleaning and flushing procedures.
Compact and High-Torque Magnetic Coupling
Standard high-strength magnetic couplings provide increased operational flexibility, with inner magnets directly attached to the rotor, resulting in an exceptionally compact design.
Straightforward Construction
With only seven essential components required, the simplified design enhances reliability, reduces system intricacy, and facilitates easier maintenance and repair processes.
Compatibility with Competitor Pumps
Interchangeable with up to 95% of currently used packed, mechanically sealed, and seal-less magnetic drive gear pumps, the E Series Magnetic Drive Gear Pumps require no modifications to piping, driver, baseplate, or coupling.
Cost-Effective Initial Investment
Thanks to the uncomplicated seven-component design, the E Series Magnetic Drive Gear Pumps offer a significantly lower upfront cost compared to magnetic drive gear pumps from competitors.
Specifications and Performance
Available Materials
Max Temperature
Capacity
Max Pressure
Pump Selection Performance Criteria
|
NOMINAL PUMP RATING |
MAX.DISCHARGE PRESSURE1,2 |
MAX. TEMPERATURE |
NOMINAL PUMP RATING |
MAX.DISCHARGE PRESSURE1,2 |
MAX. TEMPERATURE |
||
DuctileIron/CarbonSteel |
StainlessSteel |
|||||||
Model |
RPM |
GPM(m3/h) |
PSIG (bar) |
Fahrenheit (Celsius) |
RPM |
GPM(m3/h) |
PSIG (bar) |
Fahrenheit (Celsius) |
E1-2 |
1,750 |
15 (3.4) |
200(13.8) |
500°(260°) |
1,150 |
10 (2.3) |
150(10.3) |
500°(260°) |
E1-4 |
1,750 |
30 (6.8) |
200(13.8) |
500°(260°) |
1,150 |
20 (4.5) |
150(10.3) |
500°(260°) |
E1-24 |
780 |
75 (17.0) |
200(13.8) |
500°(260°) |
640 |
55 (12.5) |
150(10.3) |
500°(260°) |
E1-32 |
780 |
100(22.7) |
200(13.8) |
500°(260°) |
640 |
80 (18.2) |
150(10.3) |
500°(260°) |
E1-55 |
640 |
135(30.7) |
200(13.8) |
500°(260°) |
520 |
110(25.0) |
150(10.3) |
500°(260°) |
E1-69 |
640 |
170(38.6) |
200(13.8) |
500°(260°) |
520 |
140(31.8) |
150(10.3) |
500°(260°) |
E1-82 |
640 |
200(45.4) |
200(13.8) |
500°(260°) |
520 |
160(36.3) |
150(10.3) |
500°(260°) |
E1-133 |
520 |
300(68.1) |
200(13.8) |
500°(260°) |
520 |
300(68.1) |
150(10.3) |
500°(260°) |
E1-222 |
520 |
500(113.6) |
200(13.8) |
500°(260°) |
520 |
500(113.6) |
150(10.3) |
500°(260°) |
Competitor Model Cross Reference
BLACKMER E SERIES |
BLACKMER G SERIES |
VIKING® |
TUTHILL® |
GORMAN-RUPP® |
E1-2 |
G1-2 |
H |
015 |
GHS 1-1/2 |
E1-4 |
G1-4 |
HL |
030 |
GHS 1-1/2 |
E1-24 |
G1-24 |
K |
120 |
GHS 2 |
E1-32 |
G1-32 |
KK |
130 |
GHS 2 |
E1-55 |
G1-55 |
L & LQ |
200 |
GHS 2-1/2, 3 |
E1-69 |
G1-69 |
LL |
210 |
GHS 3 |
E1-82 |
G1-82 |
LS |
250 |
GHS 3 |
E1-133 |
G1-133 |
Q |
N/A |
GHS 4 |
E1-222 |
G1-222 |
QS |
550 |
GHS 6 |