Pumps from the Petroleum 8 series of self-priming centrifugal pumps have the vacuum capacity to lift liquids up to 25 feet above their source. The Petroleum 8 is available in three different models: PO, PG, and PE 8, and can handle a variety of fuels.
A Petroleum 8 PumPAK® is a completely manufactured and run-tested pump end that is simple to couple to a variety of drivers, including gas engines, 56C and 145TC frame motors, hydraulic motors, and gas engines. Additionally, a bearing pedestal for belt drive or a T-frame motor is offered.
Standard features include SS drive sleeve, SS fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.
The Petroleum 8 Pump is available in three distinct models: PG, PO and PE
Model PG Pumps - Compatible For Gasoline, Kerosene, Avgas & Jet Fuel
Model PO Pumps - Compatible For BioDiesel, Fuel Oil & Diesel
Item No | Parts No | Description | QTY. |
1 | 21242 | Capscrew-5/16"-18x7/8" | 8 |
2 | 21238 | Lockwasher 5/16 | 14 |
3 | 35614 | Suction Flanged D-2" NPT | 1 |
4* | 35609 | Gasket Cork/Buna | 2 |
5 | 35604 | Housing Ductile | 1 |
6 | 35615 | Discharge Flange D-2" NPT | 1 |
7* | 22258 | Wear Plate Aluminum | 1 |
8 | 22655 | Jam Nut - 5/8"-18 | 1 |
9 | 22293 | Impeller C 5" DIA | 1 |
10 | 30321 | Stud - 5/16"-18x1.13" | 6 |
11 | 21284 | Hexnut - 5/16"-18 | 6 |
12* | 35722 | Gasket C-4433 | 1 |
13 | 35608 | Adaptor Ductile | 1 |
14 | 21251 | Capscrew 3/8-16x7/8 | 4 |
15 | 21266 | Lockwasher SS: 3/8 | 4 |
16 | 21237 | Acorn Nut - 5/16"-18 | 2 |
17* | 21248 | Gasket - 1/2x5/16x1/16 | 2 |
18 | 21267 | Pipe Plug SS 1/4 NPT | 1 |
19 | 21249 | Screw SS 5/16-18x1 | 2 |
20 | 25684 | Drive Sleeve SS- 7/8 SL | 1 |
21* | 35610 | Seal 1" T-2 Car/Sic/Vit | 1 |
22 | 35613 | Clamp B: 7/8 Sl | 1 |
23 | 26027 |
El Mtr: 3-3 145TC 3450 230/460 Explosion Proof |
1 |
* Suggested replacement parts
**Compatiable for kerosene, Jet A/B & Gasoline
Item No | Parts No | Description | QTY. |
1 | 21242 | Capscrew-5/16"-18x7/8" | 8 |
2 | 21238 | Lockwasher 5/16 | 18 |
3 | 35614 | Suction Flanged D-2" NPT | 1 |
4* | 35609 | Gasket Cork/Buna | 2 |
5 | 35604 | Housing Ductile | 1 |
6 | 35615 | Discharge Flange D-2" NPT | 1 |
7 | 22655 | Jam Nut - 5/8"-18 | 1 |
8 | 22293 | Impeller C 5" DIA | 1 |
9 | 30321 | Stud - 5/16"-18x1.13" | 6 |
10 | 21284 | Hexnut - 5/16"-18 | 6 |
11* | 35722 | Gasket C-4433 | 1 |
12 | 35606 | Adaptor Ductile | 1 |
13 | 35612 | Clamp B: 3/4 SL | 1 |
14 | 22321 | Woodruff key stl | 1 |
15 | 21278 | Capscrew 5/16"-24 x 0.88 | 4 |
16 | 26140 | Pedestal C | 1 |
17 | 21237 | Acorn Nut - 5/16"-18 | 2 |
18* | 21248 | Gasket - 1/2 x 5/16 x 1/16 | 2 |
19 | 21267 | Pipe Plug SS 1/4 NPT | 1 |
20* | 22258 | Wear Plate Aluminum | 1 |
21 | 21249 | Screw SS 5/16-18x1 | 2 |
22 | 22286 | Drive sleeve SS - 3/4 | 1 |
23* | 35610 | Seal 1" T-2 Car/Sic/Vit | 1 |
24 | 26085 |
Shaft STL |
1 |
25 | 22300 |
Ball Bearing |
2 |
26 | 21695 |
Snap Ring |
1 |
* Suggested replacement parts
**Compatiable for kerosene, Jet A/B & Gasoline
Item No | Parts No | Description | QTY. |
1 | 21242 | Capscrew-5/16"-18x7/8" | 8 |
2 | 21238 | Lockwasher 5/16 | 20 |
3 | 22387 | Suction Flanged C-2" NPT | 1 |
4* | 35609 | Gasket Cork/Buna | 2 |
5 | 22251 | Housing Cast | 1 |
6 | 22311 | Discharge Flange C-2" NPT | 1 |
7 | 22655 | Jam Nut - 5/8"-18 | 1 |
8 | 22293 | Impeller C 5" DIA | 1 |
9 | 37140 | 1/2" NPT pipe Plug ZPS | 1 |
10 | 21267 | Pipe Plug SS 1/4 NPT | 1 |
11* | 22260 | Wear Plate Steel | 1 |
12 | 37137 | FHS Screw SS - 5/16-18 x .62 | 2 |
13 | 22286 | Drive Sleeve SS- 3/4 | 1 |
14 | 30321 | Stud - 5/16"-18x1.13" | 6 |
15 | 21284 | Hexnut SS- 5/16"-18 | 8 |
16* | 25460 | Seal 1" T-21 NRS | 1 |
17* | 35722 | Gasket C -4433 | 1 |
18 | 22247 | Adaptor Cast | 1 |
19 | 23002 | Clamp Assy SS: 3/4 SL | 2 |
20 | 26141 | Pedestal Assy C | 1 |
21 | 21278 | Capscrew - 5/16"-24 x 0.88 | 4 |
22* | 37141 | O Ring Viton - AS-568-149 | 1 |
* Suggested replacement parts
**Compatiable for diesel, bio-diesel & Fuel oil