MSAA75 — 4" LC Meter (2,650 LPM)

MSAA75 — 4" LC Meter (2,650 LPM)

Rating: 2650 LPM, 285 psi (19.7 bar, 1965 kPa)
Flange: 4″
Meter Construction: Steel Case, Aluminum Element
Seals: Buna/Viton® as noted by catalog number
Maximum Pressure: 285 psi (as listed by catalog number)
Temperature: -40° to 185° F

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Meter Classes	Description	Bearing Material
Class 1	Refined petroleum products	*Ni-Resist
Class 14	Crude oil	*Ni-Resist
Class 16	Alternative fuels and solvents	Carbon

*carbon bearings are standard on some meter sizes of this class, please consult factory.

MSAA75A1 METER WITH REGISTRATION

CATALOG NUMBER	FLOW	UNIT OF MEASURE	SEALS	TEMP. COMP.	W&M APPROVAL
MECHANICAL REGISTRATION
MSAA75A1-MECH-NP#1	L-R	DEKALITRES	BUNA	N/A	OIML
MSAA75A1-MECH-NP#2	L-R	WH GAL	VITON®	N/A	NIST
MSAA75A1-MECH-WP#2*	R-L	WH GAL	BUNA	N/A	NIST
MSAA75AT1-MECH-WP#1**	L-R	DEKALITRES	VITON®	YES	OIML

*1000PPR PHOTOELECTRIC PULSER

**10PPR DRY REED PULSER

MSAA75S1 METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER	FLOW	UNIT OF MEASURE	SEALS	W&M APPROVAL
POD (PULSE OUTPUT DEVICE)
MSAA75S1-POD#1	L-R	DEKALITRES	BUNA	OIML
MSAA75S1-POD#2	L-R	WH GAL	VITON®	NIST

MSAA75A2 METER WITH REGISTER

CATALOG NUMBER	FLOW	PRESSURE	UNIT OF MEASURE	TEMP COMP.	SOFTWARE	W&M APPROVAL
LCR®-II REGISTRATION
MSAA75AT2-LCR2-I#1 (CL1, DIV1)	L-R	285	WH GAL	Y	SL200 ST200	NIST
MSAA75AT2-LCR2-I#2 (CL1, DIV1)	R-L	285	WH GAL	Y	SL200 ST200	NIST
MECHANICAL REGISTRATION
MSAA75AT2-MECH-NP#1	R-L	285	WH GAL	Y	N/A	NIST

MSAA75P2 METER LESS REGISTER AND GEAR PLATE

CATALOG NUMBER	FLOW	PRESSURE	UNIT OF MEASURE	W&M APPROVAL
LESS REGISTER AND GEAR PLATE
MSAA75P2-LRG#1	L-R	285	WH GAL	NIST
MSAA75P2-LRG#2	R-L	275	WH GAL	NIST

MSAA75S2 METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER	FLOW	PRESSURE	UNIT OF MEASURE	W&M APPROVAL
POD (PULSE OUTPUT DEVICE)
MSAA75S2-POD#1	L-R	285	WH GAL	NIST

MSAA75A14

METER WITH REGISTER WITH 4”, 150# ANSI RF FLANGE

CATALOG NUMBER	FLOW	UNIT OF MEASURE	SEAL
MECHANICAL REGISTRATION
MSAA75A14-MECH-NP#1	L-R	WH. GAL	VITON

MSAA75S16

METER WITH POD (PULSE OUTPUT DEVICE)

CATALOG NUMBER	FLOW	UNIT OF MEASURE	SEALS	W&M APPROVAL
POD (PULSE OUTPUT DEVICE)
MSAA75S16-POD#1	L-R	LITRES	VITON®	NIST
MSAA75S16-POD#1	L-R	LITRES	VITON®	CAN

Use the chart below to determine maximum meter flow rate relative to meter bearing material and product viscosity:

Determine the percent of rated capacity at which the meter will be required to operate;
Determine product viscosity at system operating temperature;
Plot the point on the chart where the two lines intersect;
Determine the meter bearing material from construction/application table above and locate the corresponding slope on the chart.

If the plotted point is above the bearing material slope, you are outside the allowable pressure loss for the specified meter and bearing. You should either chose a larger meter, reduce flow rate, or consider alternative bearing materials.