AYTC is an authorized full service distributor of Scully products. Scully is the market leader in overfill prevention systems, retained product monitoring, vehicle grounding, level alert notification and vehicle to terminal communications.
The ordering information below is for FM and FMC approved units. For International ATEX and SIL approved models see:
Control Units
Part Number | Description | DIM X | DIM Y | Depth |
---|---|---|---|---|
07851 ST-15-WX3 | Three-Channel Sensing Point Control Unit | 16″ | 24″ | 7.25″ |
07852 ST-15-WX4 | Four-Channel Sensing Point Control Unit | 16″ | 24″ | 7.25″ |
07853 ST-15-WX5 | Five-Channel Sensing Point Control Unit | 24″ | 30″ | 7.25″ |
07854 ST-15-WX6 | Six-Channel Sensing Point Control Unit | 24″ | 30″ | 7.25″ |
07855 ST-15-WX7 | Seven-Channel Sensing Point Control Unit | 24″ | 30″ | 7.25″ |
07856 ST-15-WX8 | Eight-Channel Sensing Point Control Unit | 24″ | 30″ | 7.25″ |
07857 ST-15-WX9 | Nine-Channel Sensing Point Control Unit | 30″ | 36″ | 7.25″ |
07858 ST-15-WX10 | Ten-Channel Sensing Point Control Unit | 30″ | 36″ | 7.25″ |
07859 ST-15-WX11 | Eleven-Channel Sensing Point Control Unit | 30″ | 36″ | 7.25″ |
07860 ST-15-WX12 | Twelve-Channel Sensing Point Control Unit | 30″ | 36″ | 7.25″ |
Product Range: | Gasoline through #6 oil, waste oil, chemicals, water, etc. Consult Scully for specific application questions. |
Controls: | Alarm test push button; alarm silence circuit with push button and automatic reset |
Indicator Lights: | Green = Power On; Red = Alarm Condition |
Response Time: | High-level: .05 seconds maximum |
Low-level: 3-7 seconds | |
Enclosure: | NEMA 4 style for indoor/outdoor use |
Power Requirements: | 115 VAC, +/- 15%, 50–60HZ, 20 watts maximum. Also available in 240 VAC models; consult Scully for details |
Electrical Connections: | Internal Terminal Strips |
Output Provisions: | External Alarm, 115VAC, 3 A max. Individual channel SPDT contacts, rated 5A- 250 VAC |
Compatible Sensors: | Refer to technical data sheets; 60635, 60715 |
Intrinsic Safety Information: | The ST-15-WX control units can be mounted in any non-hazardous area and utilize oil tight controls and indicators. Internal circuitry provides intrinsically safe (I.S.) output, for probe connections. This output is rated for Class I, Div 1, Group D hazardous areas. |
SIL Certification: | IEC 61508 Certified SIL2 HFT=0 SIL3 HFT=1 |
Chemical Applications: | Refer to technical data sheet 67100 |
The Scully Model 15 ST-15-WX Liquid Level Detection System features individual control channels to monitor from 2 to 12 sensing sensors. The ST-15-WX offers all these advantages: