AYTC is an authorized full service distributor of Scully products. Scully is the market leader in overfill prevention systems, retained product monitoring, vehicle grounding, level alert notification and vehicle to terminal communications.
09188 | SP-PYIO/4P | Portable Cane Sensor, 36″, 4-Pin Plug, 20′ Straight Cable |
09466 | SP-TO/SS/4P | Portable Chemical Cane Sensor |
07725 | SP-PYU/4P | Portable Cane Sensor, 36″, 4 Pin Plug, 20′ Straight Cable |
07726 | SP-PYH/4P | Portable Cane Sensor, 36″, 4 Pin Plug, 20′ Straight Cable |
08261 | SP-PYH(SS)/4P | Portable Cane Sensor, 36″, 4 Pin Plug, 20′ Straight Cable |
08839 | SP-PYU(SS)/4P | Portable Cane Sensor, 36″, 4 Pin Plug, 20′ Straight Cable |
07756 | SP-PYUG/4P | Portable Cane Sensor, GATX Coupling, 4-Pin Plug, 20’ Cable |
07757 | SP-PYHG/4P | Portable Cane Sensor, GATX Coupling, 4-Pin Plug, 20’ Cable |
09326 | SP-PYU/SS/4R | Portable Cane Sensor, 2″ Coupling |
09483 | SP-PYFU/SS/4P | Portable Optic Chemical Sensor Care Probe, 36″, 4 Pin, 20’ Coil Cable |
REPLACEMENT PARTS
Part Number | Description |
---|---|
09189 | SP-PYIO Replacement Optic Cane Sensor |
09375L1 | Sensor Assy, two-wire Optic, Chemical (SS) BAS/FMC |
09376L1 | Sensor Assy, five-wire Optic, Chemical (SS) BAS/FMC |
09190 | SP-PYU Replacement Cane Sensor (Low Temp Thermistor) |
09191 | SP-PYH Replacement Cane Sensor (High Temp Thermistor) |
09183 | SP-PYU(SS) Replacement Cane Sensor (Low Temp Thermistor SS) |
09184 | SP-PYH(SS) Replacement Cane Sensor (High Temp Thermistor SS) |
07707 | SJ-4D Pole Pattern Socket, 4 Pin for Cane Probes |
31504 | Signal Conditioner for Rack Mounting ST-47 Dual Mode Operation |
07720 | SJ-6S Thermistor Socket for Bottom/Top Loading Operation |
09478 | Clamp Assembly, Horiz/Vertical Portable Cane |
Temperature: | SP-PY;-40° to +120°F(-40°to +48°C) SP-PYH; 0° to +200°F(-18°to +93°C) SP-PYFU;-40° to +140°F (-40°to +60°C) |
Construction: | SP-PY and PYH wetted parts (Pyrex®): Aluminum, Viton®, Borosilicate glass SP-PY(SS) and PYH(SS) wetted parts: 316 stainless steel, Teflon®, borosilicate (Pyrex®) glass SP-PYFU wetted parts: Aluminum, Viton®, Epoxy; All models have Stainless Clamp screws |
Level Repeatability: | +/- 1⁄16″ (1.6mm) |
Size: | Refer to diagram |
Cable: | 20′ (6m) fuel resistant |
Note: Scully SP-PY, SP-PYH, and SP-PYFU portable sensors are part of an intrinsically safe system using entity parameters in conjunction with Scully control monitors approved by FMC.
The intrinsically safe outputs of these control units allow the sensors to be used in Class I Division 1, Group D Hazardous Locations. Consult us for other specific details.