Tuthill PD Plus Air & Gas Blowers

The Tuthill PD Plus is a long-established line of premium, high-pressure industrial blowers with heavy-duty models ranging from 3.25” to 12” gear diameter and 2.5” to 48” rotor length. These blowers are renowned for their quality, dependability, and outstanding performance. They are offered in air and gas configurations rated up to 18 PSI / 17“ Hg vac.

Original Products
Warranty Against Defects
Returns & Refunds Policy
Ships Worldwide
Dedicate Support

Need Help? Call + 971 4 3330105

Email Your Query

Description
Brand
Model Specific Information
Applications

Vertical & Horizontal Air Flow: This series has wide application in pneumatic conveying, wastewater treatment and the general process industry where high pressure, high volume air is required. Seal areas are vented to atmosphere to relieve process pressure against the internal lip seals, and to provide oil-free air.
Vertical & Horizontal Single Envelope Gas Service: This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas.
Vertical & Horizontal Double Envelope Gas Service: This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on series above, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.
Special Materials: Standard construction materials include cast iron housing, end plates, end covers with port fittings, and ductile iron rotors and shafts, while special materials available include stainless steel, carbon steel, or ductile iron models.
Special Testing: ASME PTC-9 (1 PSIG slip method), hydrostatic testing to 150 PSIG (10.35 bar g), pressure gas testing to 100 PSIG (6.9 bar g), and seal leakage testing. Bi-Protec® is available as a Nickel/Armoloy® special coating.
Optional Cooling Coils: All vertical flow 5500 PD PLUS models are available with cooling coils to provide cooling of lubricating oil with less than 0.5 GPM cooling water for high performance applications.

Tuthill

Tuthill has been manufacturing industrial pumping solutions on the southside of Chicago since 1927 with a clear value-differentiation in the marketplace and focused growth in life-foundational markets. Ali Yaqoob Trading represents Tuthill's Process Pumps, Lubrication & Circulation Pumps, Vacuum Pump, Flow Meters, and Blowers divisions.

Model	CFM / m³/h	HP / kW
3202	8-90 / 14-153	1-9 / 1-6
3204	12-146 / 20-248	1-13 / 1-10
3206	21-220 / 36-374	1-18 / 1-3
3210	37-368 / 63-626	1-28 / 1-21
4009	49-497 / 83-845	2-45 / 1-34
4012	87-682 / 148-1159	2-51 / 2-38
5507	99-794 / 168-1350	3-70 / 2-52
5511	152-1171 / 258-1991	3-96 / 2-62
5514	490-1522 / 833-2587	4-95 / 3-71
5518	350-1962 / 596-3335	4-94 / 3-70
7010	349-1690 / 593-2873	4-143 / 3-107
7013	445-2148 / 757-3652	6-183 / 5-136
7017	601-2807 / 1022-4772	7-226 / 5-169
7021	783-3478 / 1331-5913	8-244 / 6-182
7026	1052-4314 / 1788-7334	10-242 / 1-180
9016	354-3028 / 602-5148	6-215 / 4-160
9020	465-3986 / 791-6776	7-280 / 5-209
9027	620-5315 / 1054-9036	8-371 / 6-276
1215	284-3764 / 483-6399	6-271 / 5-202
1224	494-6036 / 840-10261 9	9-427 / 6-318
1230	618-7546 / 1051-12828	10-496 / 8-370
1236	771-9065 / 1311-15411	12-385 / 9-287
1248	1304-9273 / 2217-15764	15-267 / 11-199