Cim-Tek 300 Series Dispenser Filters
Designed for gasoline or diesel service station pumps, commercial fueling dispensers, most Dresser, and Tokheim Service Station dispenser. Cellulose and Hydrosorb filters are for use with gasoline, diesel, biodiesel or ultra-low sulfur diesel (ULSD). Alcohol Monitors for ethanol blends up to E15 (MB). Microglass filters for biodiesel blends up to B100 (BMG). High-Alcohol Content filters for E85 (BHA).
Benefits & Design Features
- Up to 25 gpm (94.6 lpm) maximum flow
- 50 psi (3.4 bar) maximum working pressure
- Various Micron media(s) available
- Microglass Filters have a higher dirt-holding capacity for longer life
- Filters are UL® recognized for use in fuel dispensers
- Pre-Lubed gaskets on all 300 series filters except high alcohol content (BHA) filters, which use Viton gaskets.
-
Original Products -
Warranty Against Defects -
Returns & Refunds Policy -
Ships Worldwide -
Dedicate Support
- Description
- Brand
- 300 Particulate Series
- 300 Hydrosorb Series
- 1″-12 Thread (3/4″ Flow)
- 3 3/4″ Diameter x 5 1/2″ Length
Cim-Tek
Ali Yaqoob Trading Co. LLC is an authorized full service distributor of Cim-Tek products. Cim-Tek, is an innovative, customer driven manufacturer of filtration products and related equipment for petroleum, industrial, bio-fuel, heavy duty applications.
Ordering Information
Part No. |
Model No. |
Description |
| 70806 | 300-02 | Spin-On Filter for Particulate Removal with 2 Micron Cellulose/Microglass Resin-Impregnated Media Blend. (1″–12 UNF Thread) |
| 70010 | 300-10 | Spin-On Filter for Particulate Removal with 10 Micron Cellulose Resin-Impregnated Media. (1″–12 UNF Thread) |
| 70012 | 300-30 | Spin-On Filter for Particulate Removal with 30 Micron Cellulose Resin-Impregnated Media. (1″–12 UNF Thread) |
| 70026 | 300MG-10 | Spin-On Filter for Particulate Removal with 10 Micron High Performance Microglass Media. (1″–12 UNF Thread) |
| 70077 | 300 Wire Mesh | Spin-On Filter for Particulate Removal with 144 Micron Stainless Steel Wire Mesh for Cold Weather Application. (1″–12 UNF Thread) |
Adaptors
Part No. |
Material |
Description |
Fuel Ports |
Nose |
Use With |
| 50181 | Aluminum | Single Adaptor | 3/4” NPT | 1″–12 UNF | All Above |
| 50003 | Cast-Iron | Single Adaptor | 3/4” NPT | 1″–12 UNF | All Above |
| 50002 | Cast-Iron | Single Adaptor | 1″ NPT | 1″–12 UNF | All Above |
| 50005 | Aluminum | Single Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
| 50006 | Aluminum | Double Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
| 50015 | Cast-Iron | Single Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
NOTE: See adaptor page for additional details.
Replacement Gasket
Part No. |
Description |
| 90025 | Buna-N Pre-Lubed Gasket Used On All Above |
Ordering Information
Part No. |
Model No. |
Description |
| 70059 | 300HS-10 | Spin-On Filter for Water Detection and Particulate Removal with 10 Micron Hydrosorb® Media. (1″–12 UNF Thread) |
| 70064 | 300HS-30 | Spin-On Filter for Water Detection and Particulate Removal with 30 Micron Hydrosorb® Media. (1″–12 UNF Thread) |
Adaptors
Part No. |
Material |
Description |
Fuel Ports |
Nose |
Use With |
| 50181 | Aluminum | Single Adaptor | 3/4” NPT | 1″–12 UNF | All Above |
| 50003 | Cast-Iron | Single Adaptor | 3/4” NPT | 1″–12 UNF | All Above |
| 50002 | Cast-Iron | Single Adaptor | 1″ NPT | 1″–12 UNF | All Above |
| 50005 | Aluminum | Single Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
| 50006 | Aluminum | Double Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
| 50015 | Cast-Iron | Single Adaptor | 1 1/2″ NPT | 1″–12 UNF | All Above |
NOTE: See adaptor page for additional details.
Replacement Gasket
Part No. |
Description |
| 90025 | Buna-N Pre-Lubed Gasket Used On All Above |
