Compressor Accessories & Repair Kits

AYTC offers a comprehensive range of compressor accessories such as 4-way valves, flo-chek valves, low oil pressure switches and gauges that are designed specifically for Corken compressors.

4-Way Valve (Non-Lubricated)

A four-way valve is a convenient and simple means of reversing the direction of flow to a compressor. The body is made of ductile iron and comes complete with a handle and flow direction indicator.
 
Connections: 1” or 1-1/4” NPT and 2” ANSI flanged (300#) 
Type: Non-lubricated, full port design with flow indicator 
Seals: Reinforced PTFE seals and seats
Maximum working pressure: 500 psig (34.5 bar g)

Flo-Chek Valve

The Flo-Chek enables you to detect flow in the gas or liquid lines and prevents release of product from storage tank in the event of a hose failure. Flow-indicating and back-check valves feature all ductile iron construction.
 
Connections: 1-1/4” up to 4” NPT or weld flanges 
Maximum working pressure: 400 psig (27.6 bar g)

Strainer

The right-angle strainer minimizes pressure drop and is designed for liquid or vapor service. Comes complete with a ductile iron body, monel screen and steel plug.
 
Connections: 1-1/4” NPT
Mesh: Available with liquid (14 mesh) or vapor (40 mesh) service 
Maximum working pressure: 400 psig (27.6 bar g)

Pressure Gauges

Corken’s stainless steel, glycerine filled pressure gauges will mount to the compressor head or in the piping system.
 
Dual scale: psi and kg/cm2 
Range: 0 to 400 psi (0 to 28 kg/cm2) range with a 5 psi (0.34 bar) increment 
Type: 2-1/2”, 270° dial with 1/4” NPT center back connection

Automatic Liquid Trap

If the application conditions involve liquid forming in the suction line during operation or the compressor is unattended, an automatic liquid trap is recommended. The automatic liquid trap has one NEMA 7 liquid-level switch and a drain valve. When liquid level inside the trap reaches a critical level, the liquid-level switch will shut down the compressor before any damage is incurred.
 
Connections: 1-1/4" x 1-1/4" NPT or 1-1/4" x 1-1/2" NPT connections.

Mechanical Liquid Trap

A mechanical trap is useful when liquid is only present during start up. Our mechanical liquid trap comes with a mechanical float assembly and drain valve only.
 
Connections: 1-1/4" x 1-1/4" NPT or 1-1/4" x 1-1/2" NPT

Automatic Liquid Trap (ASME Code-Stamped)

Applications with a large flow volume due to a long suction line and the compressor is left unattened, our ASME code-stamped automatic liquid trap is recommended. An ASME code-stamped automatic liquid trap has two NEMA 7 liquid-level switches and an alarm, relief valve, pressure gauge, demister pad, and drain valve. When liquid level inside the trap reaches a critical level, an alarm will sound and the liquid-level switch will shut down the compressor before any damage is incurred.
 
Available with 1-1/2" x 1-1/2" NPT or 2" x 2" 300# ANSI flange connections

Compressor Repair & Rebuild Kits

AYTC is Corken's largest stocking distributor with Corken compressor repair parts, Corken pump repair parts, as well as new and rebuilt Corken compressors & pumps in stock. Maximize your profits by minimizing downtime with repair or rebuild kits for any compressor or pump.